Germany Standard Automotive Cable

FLR6Y-A

Applications

This FEP insulated low-tension automotive cable is used in motorcycles and other motor vehicles for starting , charging, lighting, signal and instrument panel circuits.

Construction

Conductor	Cu-ETP1 bare or tinned according to DIN EN13602
Insulation	Fluorinated Ethylene Propylene (FEP)
Standard Compliance	ISO 6722 Class F

Special properties

Good Thermal properties

Technical Parameters

Operating temperature: –65 °C to +210 °C

	Conductor Construction			Insulation	Cable
Nominal cross- section	No. and Dia. of Wires	Diameter of Conductor max.	Electrical resistance at 20°C bare/tinned max.	Nominal thickness	Overall Diameter Min.	Overall Diameter Max.	Weight approx.
mm2	No./mm	mm	mΩ/m	mm	mm	mm	kg/km
1x 0.35	7/0.26	0.8	54.4/55.5	0.2	1.2	1.3	4
1x 0.5	19/0.19	1.0	37.1/38.2	0.22	1.4	1.6	7
1x 0.75	19/0.23	1.2	24.7/25.4	0.24	1.7	1.9	9
1x1	19/0.26	1.35	18.5/19.1	0.24	1.9	2.1	12
1x 1.5	19/0.32	1.7	12.7/13.0	0.24	2.2	2.4	17
1x 2.5	19/0.41	2.2	7.6/7.82	0.28	2.7	3.0	27

 

*Note: Other configurations, sizes, colors and length not specified herein are available upon request.