|
Thermocouple Cable EX, JX, KX, TX
600V, 90°C Wet or Dry
Applicazione:
For use as a 600 Volt, multi-pair thermocouple instrumentation cable where flame-retardance, and moisture/chemical resistance is critical. Cable can be installed in free air, in raceways, or direct burial. The cable is also approved for wet or dry locations as well as Class 1 Division II industrial hazardous locations per NEC 501-4(b) for (UL) Type Tray Cables (TC).
Temperature rating of 90°C wet or dry. Insulation provides excellent electrical, thermal, and physical properties, excellent flame resistance and resistant to crush, compression, cuts and heat deformation. Also conductor insulation provides good low temperature (-40°C) cold bend characteristics.
Approved for direct burial.
Costruzione:
- Conductor is thermocouple alloy per ANSI MC96.1 - 1982.
- Extruded flame-retardant ethylene propylene rubber (EPR) insulation.
- Conductors twisted together with a drain wire and aluminum mylar shield. Shielded pairs cabled together with fillers as needed to form a round core. An overall aluminum mylar shield and drain wire is applied over the core.
- Pairs are color coded per thermocouple type with pair number printed on the negative (red) conductor. See chart below for specific color codes.
- Black, flame-retardant, sunlight resistant, Chlorinated Polyethylene (CPE) jacket. Available with color coded jacket.
- Available with class B stranding per ASTM B174.
Standards:
- Insulated Conductor - VW-1.
- UL Type TC, 90°C Wet or Dry, 600V
- ICEA S-82-552, 90°C Wet or Dry, 600V.
- Passes UL 1277 Flame Test (70,000 BTU/hr).
- Passes UL 1202 Flame Test (70,000 BTU/hr).
- Passes IEEE 383 Flame Test (70,000 BTU/hr).
- Passes ICEA T-29-520 Flame Test (210,000 BTU/hr).
EX - Color Code
- Chromel (Positive) - PURPLE
- Constantan (Negative) - RED
JX - Color Code
- Iron (Positive) - WHITE
- Constantan (Negative) - RED
TX - Color Code
- Copper (Positive) - BLUE
- Constantan (Negative) - RED
KX - Color Code
- Chromel (Positive) - YELLOW
- Alumel (Negative) - RED
| Item # |
Number of
Shielded Pairs |
Insulation Thickness
(mils) |
Jacket Thickness
(mls) |
Overall
Diameter
(inches) |
Weight LBS/MFT |
| ITC-20-1 |
1 |
0.025 |
0.045 |
0.270 |
35 |
| ITC-20-2 |
2 |
0.025 |
0.045 |
0.035 |
70 |
| ITC-20-3 |
3 |
0.025 |
0.045 |
0.450 |
85 |
| ITC-20-4 |
4 |
0.025 |
0.045 |
0.500 |
105 |
| ITC-20-6 |
6 |
0.025 |
0.045 |
0.600 |
160 |
| ITC-20-8 |
8 |
0.025 |
0.045 |
0.670 |
210 |
| ITC-20-10 |
10 |
0.025 |
0.045 |
0.735 |
240 |
| ITC-20-12 |
12 |
0.025 |
0.045 |
0.790 |
280 |
| ITC-20-16 |
16 |
0.025 |
0.045 |
0.890 |
360 |
| ITC-20-24 |
24 |
0.025 |
0.045 |
1.060 |
500 |
| ITC-18-1 |
1 |
0.025 |
0.045 |
0.300 |
50 |
| ITC-18-2 |
2 |
0.025 |
0.045 |
0.480 |
90 |
| ITC-18-3 |
3 |
0.025 |
0.045 |
0.510 |
115 |
| ITC-18-4 |
4 |
0.025 |
0.045 |
0.595 |
165 |
| ITC-18-6 |
6 |
0.025 |
0.045 |
0.670 |
220 |
| ITC-18-8 |
8 |
0.025 |
0.045 |
0.750 |
280 |
| ITC-18-10 |
10 |
0.025 |
0.045 |
0.820 |
340 |
| ITC-18-12 |
12 |
0.025 |
0.045 |
0.930 |
430 |
| ITC-18-16 |
16 |
0.025 |
0.045 |
1.045 |
540 |
| ITC-18-24 |
24 |
0.025 |
0.045 |
1.235 |
760 |
| ITC-16-1 |
1 |
0.025 |
0.045 |
0.325 |
60 |
| ITC-16-2 |
2 |
0.025 |
0.045 |
0.570 |
130 |
| ITC-16-3 |
3 |
0.025 |
0.045 |
0.600 |
160 |
| ITC-16-4 |
4 |
0.025 |
0.045 |
0.660 |
200 |
| ITC-16-6 |
6 |
0.025 |
0.045 |
0.740 |
270 |
| ITC-16-8 |
8 |
0.025 |
0.045 |
0.880 |
380 |
| ITC-16-10 |
10 |
0.025 |
0.045 |
0.970 |
460 |
| ITC-16-12 |
12 |
0.025 |
0.045 |
1.035 |
530 |
| ITC-16-16 |
16 |
0.025 |
0.045 |
1.165 |
570 |
| ITC-16-24 |
24 |
0.025 |
0.045 |
1.400 |
960 |
|
|
