Windmill Cables

LSOH Screened Torsion Resistant Loop Cable 0.6/1kV

Application

These cables are designed for special application condition in wind turbines, special for medium mechanical stress and for operation under permanent influence of seawater and usage outdoor.

Standards

IEC 60502
EN 50363
HD 22.13

Construction

Conductor: Stranded bare copper conductor.
Insulation: Extruded halogen free rubber compound EI8.
Screen: Tinned wire copper braid.
Sheath: Extruded halogen free EVA compound EM8.

Technical Data

Rated Voltage Uo/U (Um)	0.6/1 kV
Operating Temperatures	flexing: -35℃~+90℃; fixed installation: -40℃~+90℃
Minimum Bending Radii	fixed: 4×OD; flexing: 6×OD
Torsion Application	± 100 °/m
Maximum Permissible Tensile Load	15 N/mm² (in operation)
Short-circuit Temperature	250℃
Flame Retardant	EN 50265-2-1
Halogen Free	IEC 60754
Smoke Density	IEC 61034
Oil Resistant	Yes
Ozone Resistant	Yes
Silicone Free	Yes

Dimensions and Weight

Construction	Nominal Overall Diameter	Nominal Weight
No. of cores×mm²	mm	kg/km
25×0.75	18.0	500
25×1	20.0	550
4×1.5	10.0	150
12×1.5	16.0	400
32×1.5	26.0	950
42×1.5	35.0	1700
12×2.5	23.0	620
5×2.5	15.0	300
4×4	13.5	300